PD5N-LAMELLA-BMS2 DALI-2

DALI-2 multisensor (input device) for installation in lamella ceilings or luminaires
DALI-2 certified product
Powered via DALI bus
DALI multimaster technology according to IEC 62386 part 103
Instance 0 provides information regarding occupancy and movement for the DALI-Bus according to IEC 62386 part 303
Instance 1 provides LUX values for the DALI-Bus according to IEC 62386 part 304
Instances 2 to 6 provide information regarding the pressing of control buttons of a compatible mini-IR remote control according to IEC 62386 part 301 on the DALI bus
Parameterisation is possible via a mandatory Multimaster-Application-Controller of any manufacturer. This controller must support IEC 62386 parts 101/103/301/303/304.
Clip fastener for simple and uniform installation
Pre-assembled connection cable with plug-in system
Mixed light measurement with internal and external light sensor
Individual adaption of the PIR sensor sensitivity
Status LEDs can be activated / deactivated
Weighting of the light sensors adjustable
Bit resolution of light sensor adjustable
Reflection factor for calculated lux value adjustable
Bright LED indication for commissioning
Application examples:
staircases, small offices, open-plan offices, conference rooms, classrooms/seminar rooms

Voltage:: via DALI Bus, max. 22,5 V DC
Dimensions:: 55 x 20 x 44 mm
Settings:: via DALI-Bus and application which supports DALI multisensors according to IEC62386, parts 101, 103, 303 and 304
typ. power input:: 4,5 mA
Start-up time:: 200 ms
Detection area:: horizontal 360° (Ceiling mounting)
Range:: max. Ø 10 m across
max. Ø 6 m towards
max. Ø 4 m seated
Monitored area (tangential movement):: 78 m² / 2,5 m mounting height
Mounting height min./max./recommended:: 2 m / 5 m / 2,5 m
Degree / class of protection:: IP20 / Class II
Measured light output:: 0 - 4095 Lux, Mixed light measuring
Ambient temperature:: -25 °C to +50 °C
Housing:: polycarbonate, UV-resistant
Cable length:: 300 mm
Connections and wires:: plug WAGO 890-1112