SBA4-230 / 10 / H / KNX REG

The blind actuators KNX SBA receive KNX telegrams and control several blind motors with limit switches independently of one another
Each channel is controlled with two monostable relays and can also be manually activated with the buttons at the actuator
Each channel can be individually programmed through the ETS. Status reports, blocking functions, central switch functions and extensive calibration and positioning functions are available for selection
In the event of bus voltage failure or resumption, the switch positions of the relay can be individually programmed for each channel
The device is planned for permanent installation on a DIN-rail (top-hat) in high voltage current distributors
Installation must take place in dry interiors

Voltage:: 230 V AC 50 Hz
Dimensions:: 86 x 72 x 60 mm (4 TE)
Output voltage:: 230 V AC 50 Hz
Degree / class of protection:: IP20 / Class II
Ambient temperature:: 0 °C to +45 °C
Housing:: Plastic LEXAN UL-94-V0
Display elements:: Red LED: Programming LED
Green LED: Channel status
Manual operation:: Manual operation of the shutter channels directly on the device
KNX TP 256:: Yes
Switching power:: Roller shutter motors