Indoor 180-KNX-DX
Product Information
- KNX occupancy detector with integrated KNX bus coupler, especially for installation in walls
- 1 x Light (for regulating or switching), 1 x slave output, 3 separate HVAC-blocs
- Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
- Two logic modules
- Individual adaption of the PIR sensor sensitivity
- Measuring of mixed light thanks to internal light sensor
- Various locking functions
- Status LEDs can be activated / deactivated
- Programming button (phys. address) can be operated via remote control
- Regulation/switching of three light groups via offset (external influence possible)
- Short presence, self-adjusting follow-up time, corridor function
- Recall of light scenes
- Temperature- and noise sensor
- HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
- 5 button remote control, programmable at choice (accessory)
- Occupancy simulation
- Detection area can be extended thanks to master-slave-mode
- Extensive optimization options for light measurement
- Measured light value is communicated to the bus
- IR remote control-capable via IR remote control (optionally)
- PIN code
- Manual influence via external KNX push buttons possible
- Function control (heartbeat, cyclical sending)
- Forced switch-off
- Intelligent central-off function
- Premonition of switch-off
- Behaviour upon bus voltage return definable at choice
- Variable safety pause after switching off the lights
- Settings ex ETS 4 for integration in KNX systems
- The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
- Adaption of dimming curve
- Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
- Burn-in function for fluorescent lamps selectable from 1h till 100h
- Soft-start
- Blinds
- For use with covering (interior cover dimensions 50 x 50 mm) in 5 different colours
- In combination with centre plates usable with current frame systems of various manufacturers
- B.E.G. frames and centre plates for combination with other frame systems available
- Please order cover frame separately, available in various colours
- Application examples:
underground car parks, entrance halls, corridors/hallways, staircases, toilets, equipment rooms
Discontinued product
Link to the successor article
Technical Data
- Voltage:
- via KNX BUS
- Dimensions:
- (covering not included) 70 x 70 x 61 mm
- typ. power input:
- 12 mA
- Detection area:
- horizontal 180° (Wall mounting)
- Range:
- max. 10 m across
max. 3 m towards - Monitored area (tangential movement):
- 150 m² / 1,1 m mounting height
- Mounting height min./max./recommended:
- 1 m / 2,2 m / 1,1 m
- Degree / class of protection:
- IP20 / Class III
- Impact strength:
- IK05
- Temperature measurement range:
- -5 °C to +45 °C
- Ambient temperature:
- -25 °C to +55 °C
- Housing:
- polycarbonate, UV-resistant
- Number of light sensors:
- 1
- Number of PIR sensors:
- 1
- KNX TP 256:
- Yes
- Orientation light
- 5 – 100 % / OFF / 1 min – 255 min
- Night light:
- 5 – 100 %
- Brightness set value:
- 5 – 2000 Lux
Description
| Description | Colour | Part number | EAN number |
|---|---|---|---|
| Indoor 180-KNX-DX covering not included | - | 93364 | 4007529933648 |
