SA 230 / 16 / H / KNX REG
- Switching actuator for switching loads
- DIN-rail mount device, width 72 mm (4TE, SA4 - 230 / 16 /) or 144 mm (8 TE, SA8 - 230 / 16 /) for mounting on a DIN-rail (TH35 EN 60715) for installation in a switch cabinet
- The device has four (SA4 - 230 / 16 /) or eight (SA8 - 230 / 16 /) independant potential-free NO contacts
- The switching contacts are optimised for capacitive loads
- Manual switches for switching without bus tension
- The switching actuator is powered by the KNX bus, no additional power supply required
- Connection of the outputs is realised by means of screw terminals
Discontinued product
Link to the successor article
- Voltage:
- via KNX BUS
- Dimensions:
- 90136= 90 x 72 x 64 mm (4 TE)
93336= 90 x 144 x 64 mm (8 TE) - typ. power input:
- 5 mA typical
20 mA max. - Power consumption:
- 0,15 W
- Degree / class of protection:
- 90136= IP20 / Class II
93336= IP20 / Class II - Ambient temperature:
- -5 °C to +45 °C
- KNX TP 256:
- Yes
- Connections and wires:
- 0,2 ... 4,0 mm² rigid
0,25 ... 2,5 mm² fine-wired (with or without ferrule) - per channel
- Switching power:
- 3680 W, cos φ = 1
max. inrush current Ip (150 µs) = 600 A - Type of contact:
- µ-contacts, dry NO contact
- Outputs:
- 90136= 4 switching outputs
| SA4 - 230 / 16 / H / KNX REG | grey | 90136 | 4007529901364 |
| SA8 - 230 / 16 / H / KNX REG | grey | 93336 | 4007529933365 |
